Stuart-turner Flomate Mains Boost Bedienungsanleitung

Flomate Mains Boost Pump Installation & Maintenance InstructionsPlease leave this instruction booklet with the owner as it contains important guar

- 10 -Cont ...4 COMMISSIONING4.11 Priming: This pump is self venting. Open the mains stopcock and allow the pump to fill and vent, please note

- 11 -Cont ...6 TECHNICAL SPECIFICATIONElectricalVolts/Ph/Frequency 230/1/50Power consumed 500 WattsFull load current 2.2 AmpsRating ContinuousMax. No

- 12 -Cont ...7 TROUBLE SHOOTING GUIDESymptoms Probable Cause Recommended ActionPump will not start. No water. Check required flow of liquid is avail

- 13 -Cont ...7.11 Flow Switch Circuit Test: 1. First confirm visually that the flow switch reed clamp has not been dislodged during handling

- 14 -Cont ...8 THE FLOMATE GUARANTEE Congratulations on purchasing a Stuart Turner pump. We are confident this pump will provide many years of tr

- 15 - In the event of a claim isolate the unit and then please telephone ‘PumpAssist’.0844 98 000 97 Proof of purchase should accompany the return

DECLARATION OF CONFORMITY2006/42/ECBS EN ISO 12100-1, BS EN ISO 12100-2, BS EN 8092006/95/ECBS EN 60335-1, BS EN 60335-2-412004/108/ECBS EN 55014-1, B

- 2 -Cont ...PRODUCT DESCRIPTIONElectric motor driven peripheral pump with bypass, complete with an automatic control system consisting of flow switch

- 3 -Cont ... The flow restrictor must be replaced every 2 years.  Care must be taken to ensure the maximum pressure generated by the pump combin

- 4 -Cont ...CHECKLISTItemDescription QtyItemDescription QtyPump 1G ¾ compression fitting with isolating valve and seal (not supplied) (or alternative

- 5 -Cont ...1 READ BEFORE COMMENCING PUMP INSTALLATIONA. Water temperatureThe water entering the pump must be controlled as follows:1.11 The maxim

- 6 -Cont ...2 LOCATION - GENERAL2.11 Access: For emergencies and maintenance the pump must be easily accessible.2.12 Protection: The pump must

- 7 -2.19 Pipework Connections:  Isolating valves: Always install isolating valves (not supplied) to both suction and delivery pipe to aid fut

- 8 -Cont ...3 ELECTRICAL INSTALLATION / EARTHING3.11 Regulations: The electrical installation must be carried out in accordance with the cur

- 9 - b) Blue wire must be connected to the terminal which is marked with the letter ‘N’ or coloured black. c) Brown wire must be connected t